recent
أخبار ساخنة

Design of Concrete Structures fourteenth edition by Arthur Nilson pdf download

Home
Design of Concrete Structures fourteenth edition by Arthur Nilson. 

Design of Concrete Structures fourteenth edition by Arthur Nilson

The book in PDF Format with title Design of Concrete Structures fourteenth edition by Arthur Nilson is available to download for free and Download Link is at the end of the article 

Contents:
Chapter 1 Introduction
Chapter 2 Materials
Chapter 3 Flexural Analysis and Design of Beams 
Chapter 4 Shear and Diagonal Tension in Beams 
Chapter 5 Bond, Anchorage, and Development Length 
Chapter 6 Serviceability
Chapter 7 Analysis and Design for Torsion 
Chapter 8 Short Columns 
Chapter 9 Slender Columns
Chapter 10 Strut-and-Tie Models 
Chapter 11 Design of Reinforcement at Joints 
Chapter 12 Analysis of Indeterminate Beams and Frames 
Chapter 13 Analysis and Design of Slabs
Chapter 14 Yield Line Analysis for Slabs 
Chapter 15 Strip Method for Slabs 
Chapter 16 Footings and Foundations
Chapter 17 Retaining Walls 
Chapter 18 Concrete Building Systems
Chapter 19 Prestressed Concrete
Chapter 20 Seismic Design 
Appendix A Design Aids
Appendix B SI Conversion Factors: Inch-Pound Units to SI Units
Index

Preface: The fourteenth edition of Design of Concrete Structures has the same dual objectives as the previous work: first to establish a firm understanding of the behavior of structural concrete, then to develop proficiency in the methods used in current design practice. It has been updated in accordance with the provisions of the 2008 American Concrete Institute (ACI) Building Code.

It is generally recognized that mere training in special design skills and codified procedures is inadequate for successful professional practice. As new research becomes available and new design methods are continually introduced, these procedures are subject to frequent changes. To understand and keep abreast of these rapid develop ments and to engage safely in innovative design, the engineer needs a thorough grounding in the basic performance of concrete and steel as structural materials, and in the behavior of reinforced concrete members and structures. On the other hand, the main business of the structural engineer is to design structures safely, economically, and efficiently. Consequently, with this basic understanding as a firm foundation, familiarity with current design procedures is essential. This edition, like the preceding ones, addresses both needs.

The text not only presents the basic mechanics of structural concrete and methods for the design of individual members for bending, shear, torsion, and axial forces, but also provides much detail pertaining to applications in the various types of structural systems, including an extensive presentation of slabs, footings, foundations, and retaining walls. The important topic of joint design is included. The chapter on flexural design has been expanded to improve the presentation of both the basic material and the example problems, coverage of seismic design is updated, and an introduction to prestressed concrete is included, as in previous editions.

There have been a number of significant changes in the 2008 ACI Building Code, which governs design practice in most of the United States and serves as a model code in many other countries as well. Among these are a reorganization of the provisions for both slender column and earthquake design, the former with some simplification compared to earlier Codes and the latter with some important additions, and the addition of headed studs for use as shear reinforcement in two-way slabs and headed deformed bars as another option for use in anchoring reinforcement.

In addition to changes in the ACI Code, the text includes the modified compression field theory method of shear design as updated in the 2008 Interim Revisions to the American Association of State Highway and Transportation Officials (AASHTO) LRFD Bridge Design Specifications.

A feature of the text is the comprehensive presentation of all aspects of slab design. A chapter covering one-way and two-way edge-supported and column-supported slabs, including the new Code material on headed studs, is followed by chapters on slab analysis and design based on the theory of plasticity covering, respectively, the yield line method for analysis and the strip method for design of slabs, both particularly useful for innovative structures.

A special strength of the text is the analysis chapter, which includes load combinations for use in design, a description of envelope curves for moment and shear, guidelines for proportioning members under both gravity and lateral loads, and procedures for developing preliminary designs of reinforced concrete structures .

Most present-day design is carried out using computer programs, either generalpurpose, commercially available software or individual programs written for special needs. Step-by-step procedures are given throughout the book to guide the student and engineer through the increasingly complex methodology of current design, with the emphasis on understanding the design process. Once mastered, these procedures are easily converted into flowcharts to aid in programming. References are given, where appropriate to the more widely used commercial programs.

The text will be found suitable for either a one or two-semester course in the design of concrete structures. If the curriculum permits only a single course (probably taught in the fourth undergraduate year), the following will provide a good basis: the introduction and treatment of materials found in Chapters 1 and 2, respectively, the material on flexure, shear, and anchorage in Chapters 3.4 and 5: Chapter 6 on seryiceability. Chapter 8 on short columns, and the introduction to one and two-way slabs found in the first four sections of Chapter 13. Time may or may not permit classroom coverage of frame analysis or building systems, Chapter 12 and 18, but these could well be assigned as independent reading, concurrent with the earlier work of the course. In the authors' experience, such complementary outside reading tends to enhance student motivation The text is more than adequate for a second course, most likely taught in the first year of graduate study. 

The authors have found that this is an excellent opportunity to provide students with a more general understanding of reinforced concrete structural design, often beginning with Chapters 12 and 18 and followed by the increasingly important topics of torsion, Chapter 7: slender columns, Chapter 9, the strut-and-tie method, Chapter 10, and the design and detailing of joints, Chapter 11. It should also offer an opportunity for a much expanded study of slabs, including the remaining sec tions of Chapter 13. plus the methods for slab analysis and design based on plasticity theory found in Chapters 14 and 15. yield line analysis and the strip method of design. Other topics appropriate to a second course include foundations and retaining walls Chapters 16 and 17, and the introduction to seismic design in Chapter 20. Prestressed concrete is sufficiently important to justify a separate course. If time constraints do mot permit this, Chapter 19 provides an introduction and can be used as the text for a one-credit hour course, At the end of each chapter, the user will find extensive reference lists, which provide an entry into the literature for those wishing to increase their knowledge through independent study. For professors, the instructor's solution manual is available online at www.mhhe.com/concrete.

A word must be said about units. In the United States, regrettably, the transition from U.S. Customary System units to the metric system has proceeded very slowly, and in many quarters not at all. This is in part because of the expense to the construction industry of the conversion, but perhaps also because of  graphs and basic data in Chapter 2 are given in dual units. Appendix B gives the SI equivalents of inch-pound units. An SI version of the ACI Building Code is available.

A brief historical note may be of interest. This book is the fourteenth edition of a textbook originated in 1923 by Leonard C. Urquhart and Charles E. O'Rourke, both professors of structural engineering at Cornell University at that time. Over its remarkable 86-year history, new editions have kept pace with research, improved materials, and new methods of analysis and design. The second third, and fourth editions firmly established the work as a leading text for elementary courses in the subject area. Professor George Winter, also of Cornell, collaborated with Urquhart in preparing the fifth and sixth editions, Winter and the present senior author were responsible for the seventh eighth, and ninth editions, which substantially expanded both the scope and the depth of the presentation. The tenth, eleventh, and twelfth editions were prepared by Professor Nilson subsequent to Professor Winter's passing in 1982, the latter with Professor Duvid Darwin of the University of Kansas serving as a contributor.

Professors Nilson and Darwin were joined by Professor Charles Dolan of the University of Wyoming beginning with the thirteenth edition. All three have been deeply involved in research and teaching in the fields of reinforced and prestressed concrete, as well as professional Code-writing committees, and have spent significant time in professional practice, invaluable in developing the perspective and structural judgement that sets this book apart.

Special thanks are due to reviewers and former students for their many helpful comments and suggestions for this and previous editions. In particular, the authors would like to thank the following reviewers: Paul Barr, Utah State University, Robert N. Emerson, Oklahoma State University, A. Fafitis, Arizona State University: R. Craig Henderson, Tennessee Technological University: Max Porter, lowa State University: Pizhong Qiao, The University of Akron; Aziz Saber, Louisiana Tech University, and Erie Steinberg, Ohio University. Thanks are also due to the McGraw-Hill project team, notably Debra Hash, Sponsoring Editor: Lorraine Buczek, Developmental Editor, and Melissa Leick, Project Manager.

We gladly acknowledge our indebtedness to the original authors. Although it is safe to say that neither Urquhart nor O'Rourke would recognize very much of the detail, the approach to the subject and the educational philosophy that did so much to account for the success of the early editions would be familiar. We acknowledge with particular gratitude the influence of Professor George Winter in developing a point of view that has shaped the work in the chapters that follow.
Arthur H. Nilson 
David Darwin 
Charles W Dolan

ELECTRONIC TEXTBOOK OPTIONS
Ebooks are an innovative way for students to save money and create a greener environment at the same time. An ebook can save students about half the cost of a traditional textbook and offers unique features like a powerful search engine, highlighting. and the ability to share notes with classmates using ebooks. McGraw-Hill offers two ebook options purchasing a downloadable book from VitalSource or a subscription to the book from CourseSmart. To talk about the cbook .

From Back Cover:
The fourteenth edition of the classic text. Desigw of Concrete Structures, is completely revised using the newly released 2008 American Concrete Institute (ACI) Code. This new edition has the same dual objectives as the previous editions: first to establish a firm understanding of the behavior of structural concrete, then to develop proficiency in the methods used in current design practice. Design of Concrete Structures covers the behavior and design aspects of concrete and provides updated examples and homework problems. New material on slender columns seismic design, anchorage using headed deformed bars, and reinforcing slabs for shear using headed studs has been added. The notation has been thoroughly updated to match changes in the ACI Code. The text also presents the basic mechanics of structural concrete and methods for the design of individual members for bending, shear, torsion, and axial force, and provides detail on the various types of structural systems applications, including an extensive presentation of slabs, footings foundations, and retaining walls.

NOTABLE FEATURES INCLUDE:
• Coverage updated to match ACI 318.08.
• Expanded presentation and enhanced example problems in Chapter 3 on Flexural Analysis and Design.
• New homework problem sets. 
• Updated modified compression theory method of shear design from the AASHTO
• LRID Bridge Design Strifications and modified shear friction design procedures from the ACI Code added to Chapter 4.
•Expanded coverage on bond and development of reinforcement using headel
deformed bars in Chapter 5. 
• Slender column design requirements revised and updated in Chapter 9. 
• Guidance on preliminary design and guidelines for proportioning members in Chapter 12
• Upxlated design procedures for prestressed concrete in Chapter 19.  
• Expanded description of loading criteria and description of new design requirements for seismic design in Chapter 20.
• Text features applications that reflect the authors practical experience
For Professors, the Instructor's Solutions Manual is available online at www.mhhe.com/concrete

Design of Concrete Structures 14th edition by Arthur Nilson pdf.

Book Details:
⏩Edition: 14th
⏩Author: Arthur Nilson
⏩Publisher: McGraw-Hill Science/Engineering/Math (2009)
⏩Puplication Date: 2009
⏩Language: English
⏩Pages:  813
⏩Size: 34.3 MB
⏩Format: PDF

Disclaimer: 
engreferencebooks.com website respects the intellectual property rights of others and expects its users to do the same, The book name and content is copyrighted material by the respective publishers and we are not publishing either or distributing the book. We here at Engineering Reference Pdf; neither upload books and not share it for commercial purpose. Only downloading links are shared which are found by detailed scrutiny and research over the internet. So we are here just sharing those links not the books. If you notice any copyright material please contact us immediately at DMCA form and point out its URL, we'll remove relevant links or contents!

👇👇Downloading The Book👇👇
Download Design of Concrete Structures 14th (fourteenth) edition by Arthur Nilson in pdf format for free.

google-playkhamsatmostaqltradent