U3F1ZWV6ZTI0MzM4MDc0MTA3X0FjdGl2YXRpb24yNzU3MTY4MDE2OTY=
recent
recent engineering pdf

Electric Cables Handbook Third Edition Edited by G. F. Moore pdf download

Electric Cables Handbook Third Edition Edited by G. F. Moore.

Electric Cables Handbook Third Edition Edited by G. F. Moore

The book in PDF Format with title Electric Cables Handbook Third Edition Edited by G. F. Moore is available to download for free and Download Link is at the end of the article

Preface to Third Edition by G. F. Moore: The first and second editions of the Electric Cables Handbook were well received and there were many requests for a revised edition. The third edition provides a substantial, comprehensive and up-to-date review, reflecting the changes which have occurred in the cable industry during the last seven years. The Handbook therefore continues to be a major reference book for professional engineers and electrical contractors involved in cables.

The Handbook covers all types of energy cables, from wiring and flexible cables for general use to distribution, transmission and submarine cables. It includes information on materials, design principles, installation and standards, and the many appendices contain extensive tables of data on commonly used cable types.

Once again it has been difficult to decide which older types of cable should be excluded and which new types should be included. While the Handbook has been comprehensively revised, the main aim has been to describe adequately those new energy cables which reflect the present dynamic state of the industry. The description of cables in fires has been completely rewritten; the significant developments in high performance materials, both polymeric and paper laminate, are described in detail; the application of new materials to high voltage systems is thoroughly covered; for the first time there is an extensive description of the recent developments in high temperature superconductivity, with the emphasis on potential applications in power engineering.

The Handbook has also been significantly extended to give a broad view of communication cables for the power engineer. Recognising the increasing impact of telecommunications in the power industry, a new and substantive section describes the application of optical fibres in power transmission systems. There is also an additional section on communication cables; this includes a revision of the original chapter on electronic cables.

Reflecting the extensive revision of the text, extra material has also been added to the appendices, references and bibliography. Much of the original text has been retained in the interest of providing the necessary background to the continuing technical developments in the industry.

As in previous editions, this Handbook draws on the extensive expertise and experience of the staff of BICC Cables Ltd and the editor would like to thank the many contributors for their text, their collaboration, and many helpful suggestions. 

A particular tribute is due to the editorial committee of Dr D. G. Dalgoutte, Dr A. W. Field, and Dr K. Julian who organised the work as well as providing their own detailed technical knowledge, and to D. McAllister for his work on the first two editions and the late E. W. G. Bungay who co-edited the second edition. Finally, thanks are also due to the directors and management of BICC Cables Ltd for the provision of time and facilities for preparing the manuscript and illustrations.
G. F. Moore

Contents:
1 Introduction
PART 1: THEORY, DESIGN AND PRINCIPLES COMMON TO ALL CABLE TYPES
2 Basic Electrical Theory Applicable to Cable Design
3 Materials Used in Cables
4 Conductors
5 Armour and Protective Finishes
6 Cables in Fires - Material and Design Considerations
7 Cable Standards and Quality Assurance
8 Current Carrying Capacity
9 Short-circuit Ratings
10 Technical Data Applicable to Cable Planning and Usage

PART 2: WIRING CABLES, FLEXIBLE CABLES AND CABLES
FOR GENERAL INDUSTRIAL USE
11 Cables for Fixed Installations
12 Flexible Cables and Cords
13 Auxiliary Cables (Pilot and Telephone)
14 Manufacture of General Wiring Cables
15 Installation of General Wiring Cables
16 Mineral Insulated Cables

PART 3: SUPPLY DISTRIBUTION SYSTEMS AND CABLES
17 Supply Distribution Systems
18 Distribution Cable Types, Design and Applications
19 Paper Insulated Distribution Cables
20 PVC Insulated Cables
21 Thermoset Insulated Cables up to 3.3 kV
22 600/1000 V Cables with Combined Neutral and Earth for Public Supply
23 Service Distribution Cables
24 Polymeric Insulated Distribution Cables for 6-30 kV
25 Manufacture of Distribution Cables
26 Installation of Distribution Cables
27 Joints and Terminations for Distribution Cables
28 Testing of Distribution Cables

PART 4: TRANSMISSION SYSTEMS AND CABLES
29 Basic Cable Types for A.C. Transmission
30 Self-contained Fluid-filled Cables
31 Gas Pressure Cables
32 High Pressure Fluid-filled Pipe Cables
33 Polymeric Insulated Cables for Transmission Voltages
34 Techniques for Increasing Current Carrying Capacity
35 Transmission Cable Accessories and Jointing for Pressure-assisted and
Polymeric Cables
36 Installation of Transmission Cables
37 Thermomechanical Design
38 D.C. Cables
39 Testing of Transmission Cable Systems
40 Fault Location for Transmission Cables
41 Recent Improvements and Development of Transmission Cables

PART 5: SUBMARINE DISTRIBUTION AND TRANSMISSION
42 Submarine Cables and Systems
43 Submarine Cable Installation

PART 6: HIGH TEMPERATURE SUPERCONDUCTIVITY
44 Introduction to Superconductivity
45 High Temperature Superconductors
46 High Temperature Superconducting Power Cables

PART 7: OPTICAL FIBRES IN POWER TRANSMISSION SYSTEMS
47 Introduction to Part 7
48 Principles of Optical Fibre Transmission and Manufacture
49 Optical Fibre Cable Construction
50 Composite Overhead Conductors
51 All-dielectric Self-supporting Cables
52 Wrap Cable

PART 8: CABLES FOR COMMUNICATION APPLICATIONS 
53 Communication Systems
54 Datacommunication Cables
55 Twisted Pair Telecommunication Cables 
APPENDICES 

SCOPE OF THE THIRD EDITION: The first edition of the book covered all types of insulated cable for the supply of electrical energy for voltages from about 100 V to 525 kV. The second edition covered a similar range of cables but also reflected the significant changes in materials, the application of polymeric cables at higher voltages and the increasing technology content of high voltage (HV) transmission systems. Owing to the subsequent extensive growth of cables for electronic equipment, and their similarity to some existing energy cables, the second edition included a chapter on such applications at lower voltages. The third edition describes the further elimination of the traditional distinctions between materials, the wider use of fire retardant cables and other environmental issues, the significant advances in dielectric materials at high voltages, and the major technology developments in supertension systems. High temperature superconductivity is discussed with the emphasis on practical applications. 

We have resisted calls for a comprehensive coverage of communication cables. Nevertheless the scope of the edition has been widened substantially to include some communication cables, in particular the use of optical fibres within energy cables.

FORMAT:
The division into chapters has followed the principles established in the earlier editions and the specialist contributors have reflected the current patterns for manufacturing and marketing cables. For the benefit of the reader, and for ease of reference, each chapter is almost self-contained; there is therefore some repetition but it is hoped that this is not excessive. 

Organisation:
of the book and the cable industry There are no sharp distinctions between cable types and applications and in practice there is considerable overlap; this presents problems in chapter sequence. Operating voltage provides a rough guide but does not represent a clear division between cable types; nevertheless progress through the book broadly follows increasing voltage.

The cable making industry, together with its relationships with users and standardising authorities, was built mainly around specific factories for established groupings of cable types. Historically these groupings arose because of the materials used in the cables and the types of manufacturing plant adopted; size and weight of the cables can be allied with the same pattern.
The division of the book is set out below.
Part 1 Many aspects of cable design are common to all types; new developments and trends in usage continue to eliminate the traditional distinctions between materials. Part 1 deals extensively with materials and design features which are reasonably applicable to most cables. 

Part 2 Historically a group of cables generally known as 'wiring and general' grew around cables mainly with rubber insulation; these contrasted with power distribution cables with impregnated paper insulation. Whereas paper cables were usually bought directly by the end-user, the wiring cables were commonly marketed through distributors and wholesalers. Although the main product types still remain, the insulants used in the two fields are often similar, i.e. thermoplastics and thermosets (rubbers and crosslinked thermoplastics). These cables are often further subdivided by technology or factory, e.g. cables having thermoset insulation and sheaths, cables produced in large quantity for specific applications (such as PVC insulated cables for fixed wiring), and flexible cables. 

Part 3 This part describes cables required for public supply and heavy industrial distribution. However, the latter are designed for a wide range of power requirements and do overlap part 2. For example the British Standard for PVC armoured cables for industrial use is common to cables covered by parts 2 and 3 of the book. It is common for cables with conductor sizes of 25 mm 2 and above to be classed as power distribution cables.

Part 4 This covers cables for public supply transmission systems, but below 132 kV there is some overlap with part 3. Historically, transmission cables have been of the pressureassisted paper insulated type and major developments in paper laminated dielectrics are included. With the further development of polymeric materials, polyethylene (PE), crosslinked polyethylene (XLPE), and EPR are now well established as insulants for voltages of 132kV and above; they are described in some detail and extend the use covered earlier in the book. 

Part 5 This covers the very specialist, and growing area, of submarine cables; it deals with system design, manufacture and installation. 

Part 6 This is a new addition to the handbook and reflects the worldwide interest in high temperature superconductivity (HTS). The background to development at 4K is Introduction 3 covered followed by a description of materials, conductor fabrication, superconducting cables and their economics; the emphasis is on practical applications in power engineering. 

Part 7 This is a new addition and describes the application of optical fibres in power transmission systems. It begins with the principles of optical fibre transmission and then describes the various methods of incorporating fibres into long span power lines. 

Part 8 This part brings up to date the chapter on data communication cables from the previous handbook and includes a chapter on metallic telephone cables. Appendices As this edition continues to serve as both a reference book and a handbook the substantial list of appendices has been retained. Much of the tabular data presented provides information on the range of cables (and their properties) available in the most widely used fields. Those engineers dealing with cables on a regular basis will have manufacturers' catalogues available which give other more detailed information.

You May Also Like
  1. Handbook of Electric Power Calculations Third Edition By H. Wayne Beaty pdf download
  2. Technical Information Handbook Wire and Cable Fifth Edition by ANIXTER pdf free Download
  3. Transmission and Distribution Electrical Engineering Second edition By Colin Bayliss pdf download
  4. Handbook of Electric Power Calculations Third Edition By H. Wayne Beaty pdf download


Electric Cables Handbook Third Edition Edited by G. F. Moore pdf.

Book Details:
⏩Editor: G. F. Moore
⏩Publisher: Blackwell Science Ltd, 
⏩Puplication Date: 1997
⏩Language: English
⏩Pages: 1101
⏩Size: 19.9 MB
⏩Format: pdf

Disclaimer: 
engreferencebooks.com website respects the intellectual property rights of others and expects its users to do the same, The book name and content is copyrighted material by the respective publishers and we are not publishing either or distributing the book. We here at Engineering Reference Pdf; neither upload books and not share it for commercial purpose. Only downloading links are shared which are found by detailed scrutiny and research over the internet. So we are here just sharing those links not the books. If you notice any copyright material please contact us immediately at DMCA form and point out its URL, we'll remove relevant links or contents!

👇👇Downloading The Book👇👇
Download Electric Cables Handbook Third Edition Edited by G. F. Moore in pdf format for free.

NameEmailMessage